Key points to be followed during the operation of fully automatic horizontal molding machine equipment for casting:
1. Under normal conditions of the fully automatic molding machine, it is not allowed to start the equipment with load, nor is it allowed to use the equipment with overload.
2. After the automatic molding machine starts, operators are not allowed to leave their work positions without permission. They should concentrate their thoughts and follow the process procedures,
Carefully carry out the operation.
3. Regularly pay attention to the operation of the automatic molding machine, such as poor lubrication, loose fasteners, or damaged parts
Or pipeline leakage, or electrical failure, or bearing temperature greater than 65°C Stop the machine immediately to deal with such phenomena, and if necessary, connect it
Inform maintenance personnel to repair.
4. If an equipment accident occurs, the fully automatic molding machine should be immediately stopped, the on-site situation should be maintained, and the relevant department should be reported
Door inspection, analysis, and handling.
Add: HuaNan Equipment Park, Shaoguan City, Guangdong Province, China
Mobile: +86-18620507660
Tel: +86-18620507660
E-mail: castingmolding@gmail.com
Whatsapp/Wechat: +86 18620507660
Copyright © 2010-2024 CASTKING Casting Mechanical Equipment Co., Ltd All rights reserved.
XML Sitemap