Precautions for stopping the fully automatic horizontal box less molding machine for casting

Precautions for stopping the fully automatic horizontal box less molding machine for casting:

1. Post shift shutdown

After work, machines also need to be used by ordinary people. In this way, the machine needs to be shut down. This situation requires production personnel to conduct relevant inspections on the machine to ensure that there are no fragments of various materials inside the equipment. Therefore, people generally need to clean the machine to ensure the cleanliness of the interior of the fully automatic molding machine.

2. Temporary shutdown

Temporary shutdown refers to the situation where a fully automatic molding machine malfunctions or personnel leave the machine, causing it to stop running. If an obstacle occurs, the power supply needs to be turned off and normal inspections carried out to eliminate various faults of the machine, in order to ensure its normal operation. If personnel leave the production workbench, simply press the pause switch to ensure the current status of production.

3. Long term shutdown

If the fully automatic molding machine is no longer in production, it will require a long-term shutdown. If you enter this state, then people's cleaning of fully automatic molding machines will be more comprehensive. Generally, the main power supply should be turned off to reduce the impact of the power supply on it. In addition, all valves inside the equipment must be closed properly to ensure their good performance. In addition, people also need to clean the materials inside the equipment and clean all the lubricating oil.

If the equipment is about to shut down, it should be handled according to the downtime and status, so as to ensure that it will not encounter various problems.