Operating procedures for fully automatic horizontal parting molding machine​ for casting

Operating procedures for fully automatic horizontal parting molding machine for casting:

1、 Before starting work, it is necessary to comply with:

1. Carefully read the handover records and resolve any remaining issues from the previous shift.

2. Remove obstacles that hinder the normal operation of the equipment.

3. According to the lubrication card regulations, lubricate the equipment.

4. Check the fasteners of key parts of the equipment, and if they are loose, they must be securely fastened.

5. Those who do not have the operation certificate for this equipment are not allowed to operate.

2、 During work, it is necessary to comply with:

1. Under normal conditions of the fully automatic molding machine, it is not allowed to start the equipment with load, nor is it allowed to use the equipment with overload.

2. After the automatic molding machine starts, operators are not allowed to leave their work positions without permission. They should concentrate their thoughts and follow the process procedures,

Carefully carry out the operation.

3. Regularly pay attention to the operation of the automatic molding machine, such as poor lubrication, loose fasteners, or damaged parts

Or pipeline leakage, or electrical failure, or bearing temperature greater than 65 ° C С Stop the machine immediately to deal with such phenomena, and if necessary, connect it

Inform maintenance personnel to repair.

4. If an equipment accident occurs, the fully automatic molding machine should be immediately stopped, the on-site situation should be maintained, and the relevant department should be reported

Door inspection, analysis, and handling.

3、 After work, it is necessary to comply with:

1. Turn off the circuit, or turn off the door, and cut off the power or water and gas sources.

2. Clean the site, clean equipment, and keep the equipment and its surrounding environment in a clean state.

3. Carefully fill in the handover record and do a good job in the handover work.